Siding That Looks Owned, Not Neglected

House washing in Waynesville for homes showing algae, mold stains, or darkened siding panels

TruePeak Exterior Solutions handles full-home exterior washing across Waynesville, removing algae, mold, and accumulated grime from siding in a single appointment. Homes where dark streaking has spread from the roofline down or where green growth clings to shaded north-facing walls are the most common calls the crew responds to. A three-person team completes a 4,000 square foot home in 60 to 90 minutes, which means the work fits inside a morning without requiring you to rearrange your day.


TruePeak measures each home's square footage using aerial photography or client-submitted photos before arrival, so the crew shows up prepared with the right volume of sodium hypochlorite solution for the job. Sodium hypochlorite targets the biological root of algae and mold growth rather than just blasting surface staining away, which matters because high-pressure-only approaches can strip paint and force water behind siding panels on homes that are not built to absorb that kind of impact. During the wash, if the crew identifies localized mold concentration on a specific wall section or around window trim, same-day treatment is available at 15 percent off the upsell price for clients already on the schedule.


Request a square footage estimate and schedule your exterior wash to get the crew working within your preferred window.

Side of a beige house with windows, HVAC unit, hoses, and potted plants in a grassy yard.
Side of a beige house with two windows, an air conditioner, utility meters, and hoses near the foundation

What Sodium Hypochlorite Does That Pressure Alone Cannot

The cleaning agent matters as much as the equipment. Sodium hypochlorite breaks down the cell structure of algae and mold organisms rather than displacing them temporarily, so regrowth is slower and the surface stays cleaner longer after a properly applied soft wash treatment. The three-person crew works each elevation of the home systematically—fascia, siding field, foundation band, and trim—so no section is rinsed before the dwell time for the solution is complete.


After the wash is finished, siding returns to its original color without the gray or greenish cast that biological growth creates over time. Window frames, which often show the earliest mold spotting, come back to their base color and the contrast between trim and siding becomes readable again.

On vinyl and fiber cement siding, the cleaned surface is noticeably smoother to the touch because the biofilm layer that accumulates is completely removed rather than partially dislodged.



Homes with older painted wood siding require a lower application pressure than vinyl or fiber cement to avoid lifting paint at seams. TruePeak adjusts the rinse pressure by material type and uses solution concentration appropriate for the level of growth present, rather than applying a fixed protocol to every job regardless of conditions.

What Property Owners Ask About the Work

The questions below address how house washing is performed and what affects the scope of the work on homes with different siding types and levels of buildup.

  • What cleaning solution is used on residential siding, and why does it matter?

    Sodium hypochlorite is the active agent because it kills algae and mold at the root rather than temporarily removing visible staining; homes washed with detergent and pressure alone often show regrowth within a season because the organism is not fully eliminated.

  • How is square footage calculated before the crew arrives?

    TruePeak uses aerial imagery or photos submitted by the homeowner to measure the home's footprint and story height, allowing the crew to arrive with the correct solution volume and avoid mid-job delays.

  • What happens when mold is found in concentrated areas during the wash?

    If the crew identifies heavy mold growth on a specific wall section or around trim during a scheduled appointment, same-day targeted treatment is offered at 15 percent off the upsell rate while the equipment is already on site.

  • How does siding material affect the pressure and method used?

    Painted wood requires lower rinse pressure than vinyl or fiber cement to avoid lifting paint at lapped seams; the crew identifies material type before starting and adjusts both pressure settings and solution concentration accordingly.

  • What should a homeowner look for to confirm the wash was done correctly?

    After a proper house wash, siding returns to its base color uniformly across each elevation, window frames show no dark spotting at the corners, and the surface texture of vinyl or fiber cement feels smooth rather than slightly tacky from biofilm residue.

TruePeak Exterior Solutions also washes homes in Asheville, Black Mountain, Canton, Maggie Valley, and Clyde. To schedule service or confirm square footage for an estimate, contact TruePeak directly at (828)-519-0046 and the crew will confirm availability and method based on your home's siding type and current condition.